Make the stop raising distance configurable (Z_CANCEL_LIFT)

Author: wavexx

Firmware/ultralcd.cpp

@@ -6308,7 +6308,7 @@ void lcd_print_stop()
     lcd_cooldown(); //turns off heaters and fan; goes to status screen.
 
     if (axis_known_position[Z_AXIS]) {
-        current_position[Z_AXIS] += 50; //lift Z.
+        current_position[Z_AXIS] += Z_CANCEL_LIFT;
         plan_buffer_line_curposXYZE(manual_feedrate[Z_AXIS] / 60);
     }
 

Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h

@@ -71,6 +71,7 @@
 // Canceled home position
 #define X_CANCEL_POS 50
 #define Y_CANCEL_POS 190
+#define Z_CANCEL_LIFT 50
 
 //Pause print position
 #define X_PAUSE_POS 50

Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h

@@ -71,6 +71,7 @@
 // Canceled home position
 #define X_CANCEL_POS 50
 #define Y_CANCEL_POS 190
+#define Z_CANCEL_LIFT 50
 
 //Pause print position
 #define X_PAUSE_POS 50

Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h

@@ -71,6 +71,7 @@
 // Canceled home position
 #define X_CANCEL_POS 50
 #define Y_CANCEL_POS 190
+#define Z_CANCEL_LIFT 50
 
 //Pause print position
 #define X_PAUSE_POS 50

Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h

@@ -71,6 +71,7 @@
 // Canceled home position
 #define X_CANCEL_POS 50
 #define Y_CANCEL_POS 190
+#define Z_CANCEL_LIFT 50
 
 //Pause print position
 #define X_PAUSE_POS 50

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -73,6 +73,7 @@
 // Canceled home position
 #define X_CANCEL_POS 50
 #define Y_CANCEL_POS 190
+#define Z_CANCEL_LIFT 50
 
 //Pause print position
 #define X_PAUSE_POS 50

Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h

@@ -75,6 +75,7 @@
 // Canceled home position
 #define X_CANCEL_POS 50
 #define Y_CANCEL_POS 190
+#define Z_CANCEL_LIFT 50
 
 //Pause print position
 #define X_PAUSE_POS 50