Skip to content

Home

Jump to bottom
Lauren Greenhill edited this page Aug 18, 2023 · 27 revisions

Overview

Values stored in EEPROM

  • Downlink period
    • But should it really ??

Uplinks

  • Change downlink period
    • By making this a large value, this meets the requirement to stop downlinking completely
  • No-op

Downlinks

  • ChipSats shall not downlink at the same time. One ChipSat will have an initial delay to make the ChipSats offset.
  • ChipSats shall stop downlinking if they have not received an uplink in over 24 hours. This requirement is met by using an alive time counter which is NOT stored in EEPROM. If alive time exceeds 24 hours, downlinking is disabled.

T&C Overview

chipsat_commanding

Clone this wiki locally