Merge pull request SkylineCommunications#72 from cheeyangK/main

Update GatesAir_Maxiva_XTE_MSC2.md

Author: MariekeGO

connector/doc/GatesAir_Maxiva_XTE_MSC2.md

@@ -15,21 +15,18 @@ This connector monitors the activity of the GatesAir Maxiva XTE MSC2 device.
 | Range              | Key Features                     | Based on | System Impact |
 |--------------------|----------------------------------|----------|---------------|
 | 1.0.0.x [SLC Main] | Initial version.                 | -        | -             |
-| 2.0.0.x [SLC Main] | Support for N+1 parameters only. | 1.0.0.4  | -             |
 
 ### Product Info
 
 | Range   | Supported Firmware |
 |---------|--------------------|
 | 1.0.0.x | -                  |
-| 2.0.0.x | 06.00.0032         |
 
 ### System Info
 
 | Range   | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
 |---------|-----------------|---------------------|-------------------|---------------------|
 | 1.0.0.x | No              | Yes                 | -                 | -                   |
-| 2.0.0.x | No              | Yes                 | -                 | -                   |
 
 ## Configuration
 
@@ -53,9 +50,21 @@ SNMP Settings:
 
 The web interface is only accessible when the client machine has network access to the product.
 
-## How to use (2.0.0.x)
+## How to use (1.0.0.x)
+
+- The connector will work for both 1+1 and N+1 systems. As these are mutually exclusive, only one system type will be polled and displayed at a time.
+
+- On the **General** page, you can switch **page visibility and polling** between 1+1 and N+1. This page also displays general system information that applies to both 1+1 and N+1 systems.
+
+### 1+1
+
+- The **1+1 System Info** page displays information about the 1+1 system such as the **Controller Status**, the **Switch State**, and the **Control State**. On the **Configuration** subpage, you can configure the **system parameters** and enable the **controller events**.
+
+- On the **Transmitter A/B** page, you can check the current status of the **Alarm** parameters and the current values of transmission parameters like the **Frequency**, **Power**, and **VSWR**. On the **Events** and **Configuration** subpages, you can set the transmitter definition parameters.
 
-- The **General** page displays information about the system, such as the **Controller Status**, the **Switch State**, and the **Control State**. On the **Configuration** subpage, you can configure the **system parameters** and enable the **controller events**.
+### N+1
+
+- The **N+1 System Info** page displays information about the N+1 system such as the **Controller Status**, the **Switch State**, and the **Control State**. On the **N+1 Configuration** subpage, you can configure the **system parameters** and enable the **controller events**.
 
 - On the **Main Transmitter** page, you can see configurable general info on the main transmitters.
 
@@ -86,9 +95,3 @@ The web interface is only accessible when the client machine has network access
 - The **DVB Event Priority** page allows you to set trap priority. Its subpages allow you to set DVB trap priority for Main TX, Reserve TX, TX A, and TX B.
 
 - The pages and subpages for **DAB** and **FM** are very similar to the DVB pages mentioned above.
-
-## How to use (1.0.0.x)
-
-The **General** page displays information about the system such as the **Controller Status**, the **Switch State**, and the **Control State**. On the **Configuration** subpage, you can configure the **system parameters** and enable the **controller events**.
-
-On the **Transmitter** page, you can check the current status of the **Alarm** parameters and the current values of transmission parameters like the **Frequency**, **Power**, and **VSWR**. On the **Events** and **Configuration** subpages, you can set the transmitter definition parameters.