Update Gilat_Satellite_Networks_TotalNMS.md

Author: MariekeGO

connector/doc/Gilat_Satellite_Networks_TotalNMS.md

@@ -109,7 +109,7 @@ This page contains a table listing the CPE devices that are currently known to t
 
 If a CPE device was known earlier but no longer seems to be present in the **CPEs** table, you should check the **CPE DVEs** table. You can find this table by clicking the **CPE DVEs Configurations** page button at the bottom of this page.
 
-CPE DVEs will be created for devices for which the **DVE Created** parameter is set to *Enabled*. For new CPE devices that are added to the table, this parameter is set to *Disabled* by default. You can change this parameter setting in the **Settings** page.
+CPE DVEs will be created for devices for which the **DVE Created** parameter is set to *Enabled*. For new CPE devices that are added to the table, this parameter is set to *Disabled* by default. You can change this parameter setting on the **Settings** page.
 
 After startup, the Severity column can indicate the *Unknown* state. This is expected behavior, caused by the fact that the Severity column will only be updated when an alarm trap is received. For example, when a *Major Open* alarm comes in, *Major* will be the severity. When after a number of minutes the same alarm comes in with the *Cleared* state, the new severity will be *Normal*.