Merge pull request SkylineCommunications#680 from FentaAl/patch-13

Create Domo_Broadcast_ONYX_Decoder_Technical

Author: MariekeGO

connector/doc/Domo_Broadcast_ONYX_Decoder.md

@@ -0,0 +1,20 @@
+---
+uid: Connector_help_Domo_Broadcast_ONYX_Decoder
+---
+
+# Domo Broadcast ONYX Decoder
+
+## About
+
+The **ONYX Decoder** is a broadcast decoder that offers compression ratios on video resolutions up to 4K UHD. It is suitable for remote production applications over leased lines or satellite, handling 4xHD or 1xUHD feeds with ultra-low latency.
+
+The **Domo Broadcast ONYX Decoder** connector is used to monitor and control ONYX decoders that support both ASI and IP inputs.
+
+## Key Features
+
+- **Status**: Get detailed status information for the available modules of the ONYX Decoder.
+- **Configuration**: Check the current running config of the available modules, and set the running config for specific modules according to your preference by overwriting a config item with another item.
+- **Scalability**: Add new modules to the ONYX Decoder when necessary and have them integrated in your solution without any effort.
+
+> [!NOTE]
+> For detailed technical information, including a complete list of the implemented modules in the latest version, refer to our [Technical help page](xref:Connector_help_Domo_Broadcast_ONYX_Decoder_Technical).

connector/doc/Domo_Broadcast_ONYX_Decoder_Technical.md

@@ -0,0 +1,63 @@
+---
+uid: Connector_help_Domo_Broadcast_ONYX_Decoder_Technical
+---
+
+# Domo Broadcast ONYX Decoder
+
+## About
+
+The **ONYX Decoder** is a broadcast decoder that offers compression ratios on video resolutions up to 4K UHD. It is suitable for remote production applications over leased lines or satellite, handling 4xHD or 1xUHD feeds with ultra-low latency.
+
+The **Domo Broadcast ONYX Decoder** connector is used to monitor and control ONYX decoders that support both ASI and IP inputs.
+
+## Configuration
+
+### Connections
+
+#### HTTP Connection
+
+This connector uses an HTTP connection and requires the following input during element creation:
+
+HTTP CONNECTION:
+
+- **IP address/host**: The polling IP or URL of the destination.
+- **IP port**: The IP port of the destination (default: *443*).
+- **Device address**: The bus address of the device. If the proxy server has to be bypassed, specify *BypassProxy*.
+
+### Web Interface
+
+The web interface is only accessible when the client machine has network access to the product.
+
+## How to use
+
+Two groups of parameters are available: **Status** and **Config**. For each module, the connector will show a separate page for the status and config parameters. To control/configure the parameters, go to the corresponding Config page of the module.
+
+All the information about the **Unit** module is shown on the **General**, **Device**, **Firmware**, and **Power Supply** pages.
+
+### Available Modules
+
+In the current connector version, the status and/or config parameters of the following modules are currently available:
+
+| Module | Status | Config |
+|-------------|---------------------|
+| ASI | ✓  |  ✓ |
+| SDI | ✓  |  ✓ |
+| Genlock | ✓  |  ✓ |
+| Streaming | ✓  |  ✓ |
+| Demux | ✓  |  ✓ |
+| Video | ✓  |  ✓ |
+| Audio | ✓  |  ✓ |
+| Analog Audio | x  |  ✓ |
+| Ancillary Data | ✓  |  x |
+| Return Data | ✓  |  x |
+| Metadata | ✓  |  x |
+| GPS | ✓  |  x |
+| Serial | ✓  |  ✓ |
+| SFP | ✓  |  ✓ |
+| Network | ✓  |  ✓ |
+| License | ✓  |  x |
+| Unit | ✓  |  ✓ |
+| Storage | ✓  |  x |
+| USB | ✓  |  x |
+| Time | ✓  |  x |
+| Certificate | ✓  |  x |

connector/toc.yml

@@ -2686,6 +2686,13 @@
     topicUid: Connector_help_Dolby_DP580
   - name: Dolby DP591
     topicUid: Connector_help_Dolby_DP591
+- name: Domo Broadcast
+  items:
+  - name: Domo Broadcast ONYX Decoder
+    topicUid: Connector_help_Domo_Broadcast_ONYX_Decoder
+    items:
+    - name: Domo Broadcast ONYX Decoder Technical
+      topicUid: Connector_help_Domo_Broadcast_ONYX_Decoder_Technical
 - name: Double D Electronics
   items:
   - name: Double D Electronics DDA-219-310