Tophat Hinge for V0 (VoronDesign#391)

* Create readme.md

TophatHinge for V0

* Add files via upload

* STL files updated to the correct orientation

* Updated readme

* Updated Readme

* Delete Lower_Corner_adapter_2_and_4_Clip_x2.stl

* No overhang and multiple thicknesses

* Delete Hinge_panel_left.stl

* Delete Hinge_panel_right.stl

* Add files via upload

* Update readme.md

* Update readme.md

* Update readme.md

* Delete Hinge_panel_left_2.5mm.stl

* Delete Hinge_panel_left_2mm.stl

* Delete Hinge_panel_left_3mm.stl

* Delete Hinge_panel_right_2.5mm.stl

* Delete Hinge_panel_right_2mm.stl

* Delete Hinge_panel_right_3mm.stl

* Overhang corrected + Multi-thickness

* STEPfiles

Author: MSiemons

printer_mods/MSiemons/TophatHingeV0.1/Hinge_panel_left_2.5mm.stl

@@ -0,0 +1,24 @@
+I really like the design of the tophat of the V0 but wanted to be able to open and close it easily.
+
+This is a hinge for the tophat of the V0, without changing the aesthetic.
+It uses modified panel mounts and tophat parts. I've added panels mounts for thicknesses of 2, 2.5 and 3mm. 
+Also the lower corner clips are adapted to allow for the rotation.
+All parts can be printed without support.
+
+Printed and tested: the tophat is relatively stable and stays in the open position.
+
+Requirements:
+
+4 x M3x20
+
+6 x M3x12
+
+![image](Images/TopHathinge_render.png)
+
+![image](Images/Zoom_open.jpg)
+
+![image](Images/Tophat_open.jpg)
+
+![image](Images/Tophat_closed.jpg)
+
+![image](Images/Zoom_closed.jpg)

printer_mods/MSiemons/TophatHingeV0.1/Hinge_panel_left_2mm.stl

@@ -189,6 +189,7 @@ like so:
 |Mosher|[Door hinges with M3 screws shafts](./mosher/m3_door_hinges) |Simple mod of print in place door hinges, which uses m3 screws as shafts. |:x:|:x:|:heavy_check_mark:|:x:|
 |mpfl |[V0.1 OLED-skirt](./mpfl/V0.1_skirt_OLED) |V0.1 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |:x:|
 |MrBean66| [SKR Pro DIN Mount](./MrBean66/SKR_PRO_Mount/) |Simple mod to mount the SKR Pro board from BTT to a DIN rails. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|
+|MSiemons| [Tophat Hinge V0](./MSiemons/TophatHingeV0.1)| Simple hinge for V0 Tophat  |:heavy_check_mark:|:x:|:x:|:x:|
 |Nashuar|[V0 Dragon Toolhead M2.5x8](./Nashuar/V0_Dragon_ToolheadStockScrews) |This toolhead uses the stock M2.5 screw that came with the dragon hotend |:heavy_check_mark:|:x:|:x:|:x:|
 |natewalck |[V1.8 Jigs](./natewalck/v1.8_Jigs) |Jigs for assembling V1.8 |:x: |:heavy_check_mark: |:x: |:x:|
 | nhchiu | [V0.1 Movable Pulley Z Drive](./nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio for V0.1 | :heavy_check_mark: | :x: | :x: | :x: |