Test_TC_REFALM_2_2.yaml

# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: 223.2.2. [TC-REFALM-2.2] Primary functionality with DUT as Server

PICS:
    - REFALM.S

config:
    nodeId: 0x12344321
    cluster: "Refrigerator Alarm"
    endpoint: 1
    PIXIT.REFALM.AlarmThreshold:
        type: int16u
        defaultValue: 5

tests:
    - label:
          "Step 1: Commission DUT to TH (can be skipped if done in a preceding
          test)"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "Step 2: Ensure that the door on the DUT is closed"
      verification: |
          Ensure that the door on the DUT is closed
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 3:TH reads from the DUT the State attribute"
      command: "readAttribute"
      attribute: "State"
      PICS: REFALM.S.A0002
      response:
          constraints:
              type: bitmap32
              hasMasksClear: [0x1]

    - label: "Step 4: Manually open the door on the DUT"
      verification: |
          Manually open the door on the DUT
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 5: Wait for the time defined in PIXIT.REFALM.AlarmThreshold"
      cluster: "DelayCommands"
      command: "WaitForMs"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "ms"
                value: PIXIT.REFALM.AlarmThreshold * 1000

    - label: "Step 6: TH reads from the DUT the State attribute"
      command: "readAttribute"
      attribute: "State"
      PICS: REFALM.S.A0002 && PICS_USER_PROMPT
      response:
          constraints:
              type: bitmap32
              hasMasksSet: [0x1]

    - label: "Step 7: Ensure that the door on the DUT is closed"
      verification: |
          Ensure that the door on the DUT is closed
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 8: TH reads from the DUT the State attribute"
      command: "readAttribute"
      attribute: "State"
      PICS: REFALM.S.A0002 PICS_USER_PROMPT
      response:
          constraints:
              type: bitmap32
              hasMasksClear: [0x1]

      # Issue: https://github.com/project-chip/connectedhomeip/issues/28325
      # Issue: https://github.com/project-chip/connectedhomeip/issues/27235
    - label: "Step 9: TH sends Reset command to the DUT"
      PICS: REFALM.S.C00.Rsp && PICS_USER_PROMPT
      verification: |
          Reset command is not implemeted in Chip-tool
      cluster: "LogCommands"
      command: "UserPrompt"
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 10: TH sends ModifyEnabledAlarms command to the DUT"
      PICS: REFALM.S.C01.Rsp && PICS_USER_PROMPT
      verification: |
          ModifyEnabledAlarms is not implemeted in Chip-tool
      cluster: "LogCommands"
      command: "UserPrompt"
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 11: Set up subscription to the Notify event."
      PICS: REFALM.S.E00 && REFALM.S.A0002
      command: "subscribeEvent"
      event: "Notify"
      minInterval: 2
      maxInterval: 10

    - label: "Step 12a: Repeating step 4 Manually open the door on the DUT"
      verification: |
          Manually open the door on the DUT
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 12b: Repeat step 5 Wait for the time defined in
          PIXIT.REFALM.AlarmThreshold"
      cluster: "DelayCommands"
      command: "WaitForMs"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "ms"
                value: PIXIT.REFALM.AlarmThreshold * 1000

    - label:
          "Step 12c: After step 5 (repeated), receive a Notify event with the
          State attribute bit 0 set to 1."
      command: "readAttribute"
      attribute: "State"
      PICS: REFALM.S.A0002 && PICS_USER_PROMPT
      response:
          constraints:
              type: bitmap32
              hasMasksSet: [0x1]

    - label:
          "Step 13a : Repeat step 7 Ensure that the door on the DUT is closed"
      verification: |
          Manually open the door on the DUT
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 13b: Receive a Notify event with the State attribute bit 0 set
          to 0"
      command: "readAttribute"
      attribute: "State"
      PICS: REFALM.S.A0002 && PICS_USER_PROMPT
      response:
          constraints:
              type: bitmap32
              hasMasksClear: [0x1]