Test_TC_SMOKECO_2_6.yaml

# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    4.2.6. [TC-SMOKECO-2.6] ExpressedState Attribute - Multiple Alarms with DUT
    as Server

PICS:
    - SMOKECO.S

config:
    nodeId: 0x12344321
    cluster: "Smoke CO Alarm"
    endpoint: 1
    timeout: 3090
    TEST_EVENT_TRIGGER_KEY:
        type: octet_string
        defaultValue: "hex:00112233445566778899aabbccddeeff"
    TEST_EVENT_TRIGGER_WARNING_SMOKE_ALARM:
        type: int64u
        defaultValue: "0x005c000000000090"
    TEST_EVENT_TRIGGER_SMOKE_ALARM_CLEAR:
        type: int64u
        defaultValue: "0x005c0000000000a0"
    TEST_EVENT_TRIGGER_WARNING_CO_ALARM:
        type: int64u
        defaultValue: "0x005c000000000091"
    TEST_EVENT_TRIGGER_CO_ALARM_CLEAR:
        type: int64u
        defaultValue: "0x005c0000000000a1"
    TEST_EVENT_TRIGGER_WARNING_BATTERY_ALERT:
        type: int64u
        defaultValue: "0x005c000000000095"
    TEST_EVENT_TRIGGER_BATTERY_ALERT_CLEAR:
        type: int64u
        defaultValue: "0x005c0000000000a5"
    TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM:
        type: int64u
        defaultValue: "0x005c000000000092"
    TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM_CLEAR:
        type: int64u
        defaultValue: "0x005c0000000000a2"
    TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM:
        type: int64u
        defaultValue: "0x005c000000000094"
    TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM_CLEAR:
        type: int64u
        defaultValue: "0x005c0000000000a4"
    HIEST_PRI_ALARM:
        type: int8u
        defaultValue: 1
    HIEST_PRI_ALARM_2:
        type: int8u
        defaultValue: 7
    HIEST_PRI_ALARM_3:
        type: int8u
        defaultValue: 7
    HIEST_PRI_ALARM_4:
        type: int8u
        defaultValue: 7
    HIEST_PRI_ALARM_5:
        type: int8u
        defaultValue: 3

tests:
    - label: "Step 1: Commission DUT to TH"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "Step 2: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 3: TH subscribes to BatteryAlert attribute from DUT"
      PICS: SMOKECO.S.A0003
      command: "subscribeAttribute"
      attribute: "BatteryAlert"
      minInterval: 1
      maxInterval: 900
      response:
          value: 0
          constraints:
              type: enum8

    - label:
          "Step 4: TH subscribes to InterconnectSmokeAlarm attribute from DUT"
      PICS: SMOKECO.S.A0008
      command: "subscribeAttribute"
      attribute: "InterconnectSmokeAlarm"
      minInterval: 1
      maxInterval: 900
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 5: TH subscribes to InterconnectCOAlarm attribute from DUT"
      PICS: SMOKECO.S.A0009
      command: "subscribeAttribute"
      attribute: "InterconnectCOAlarm"
      minInterval: 1
      maxInterval: 900
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 6: TH subscribes to COState attribute from DUT"
      PICS: SMOKECO.S.A0002
      command: "subscribeAttribute"
      attribute: "COState"
      minInterval: 1
      maxInterval: 900
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 7: TH subscribes to SmokeState attribute from DUT"
      PICS: SMOKECO.S.A0001
      command: "subscribeAttribute"
      attribute: "SmokeState"
      minInterval: 1
      maxInterval: 900
      response:
          value: 0
          constraints:
              type: enum8

    - label:
          "Step 8: TH reads TestEventTriggersEnabled attribute from General
          Diagnostics Cluster"
      PICS: DGGEN.S.A0008
      cluster: "General Diagnostics"
      endpoint: 0
      command: "readAttribute"
      attribute: "TestEventTriggersEnabled"
      response:
          value: 1

    - label: "Step 9a: TH subscribes to BatteryAlert attribute from DUT"
      PICS: SMOKECO.S.A0003
      command: "subscribeAttribute"
      attribute: "BatteryAlert"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 9b: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning Battery Alert Test Event"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_WARNING_BATTERY_ALERT

    - label:
          "Step 10: TH waits for a report of BatteryAlert attribute from DUT
          with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read battery-alert 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838
          [TOO]   BatteryAlert: 1
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 11a: TH subscribes to InterconnectSmokeAlarm attribute from DUT"
      PICS: SMOKECO.S.A0008
      command: "subscribeAttribute"
      attribute: "InterconnectSmokeAlarm"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 11b: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect Smoke Alarm Test
          Event"
      PICS: SMOKECO.S.A0008 && DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM

    - label:
          "Step 12: TH waits for a report of InterconnectSmokeAlarm attribute
          from DUT with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0008
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read interconnect-smoke-alarm 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0008 DataVersion: 1795725838
          [TOO]   InterconnectSmokeAlarm: 1
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 13a: TH subscribes to InterconnectCOAlarm attribute from DUT"
      PICS: SMOKECO.S.A0009
      command: "subscribeAttribute"
      attribute: "InterconnectCOAlarm"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 13b: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect CO Alarm Test Event"
      PICS: SMOKECO.S.A0009 && DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM

    - label:
          "Step 14: TH waits for a report of InterconnectCOAlarm attribute from
          DUT with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0009
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read interconnect-coalarm 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0009 DataVersion: 1795725838
          [TOO]   InterconnectCOAlarm: 1
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 15a: TH subscribes to COState attribute from DUT"
      PICS: SMOKECO.S.A0002
      command: "subscribeAttribute"
      attribute: "COState"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 15b: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning CO Alarm Test Event"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_WARNING_CO_ALARM

    - label:
          "Step 16: TH waits for a report of COState attribute from DUT with a
          timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0002
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read costate 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0002 DataVersion: 1795725838
          [TOO]   COState: 1
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 17a: TH subscribes to SmokeState attribute from DUT"
      PICS: SMOKECO.S.A0001
      command: "subscribeAttribute"
      attribute: "SmokeState"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 17b: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning Smoke Alarm Test Event"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_WARNING_SMOKE_ALARM

    - label:
          "Step 18: TH waits for a report of SmokeState attribute from DUT with
          a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0001
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read smoke-state 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0001 DataVersion: 1795725838
          [TOO]   SmokeState: 1
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 19: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: HIEST_PRI_ALARM
          constraints:
              type: enum8

    - label:
          "Step 20: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Smoke Alarm Test Event Clear"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_SMOKE_ALARM_CLEAR

    - label:
          "Step 21: TH waits for a report of SmokeState attribute from DUT with
          a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0001
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read smoke-state 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0001 DataVersion: 1795725838
          [TOO]   SmokeState: 0
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 22: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: HIEST_PRI_ALARM_2
          constraints:
              type: enum8

    - label: "Step 23a: TH subscribes to COState attribute from DUT"
      PICS: SMOKECO.S.A0002
      command: "subscribeAttribute"
      attribute: "COState"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 23b: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for CO Alarm Test Event clear"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_CO_ALARM_CLEAR

    - label:
          "Step 24: TH waits for a report of COState attribute from DUT with a
          timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0002
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read costate 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0002 DataVersion: 1795725838
          [TOO]   COState: 0
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 25: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: HIEST_PRI_ALARM_3
          constraints:
              type: enum8

    - label: "Step 26a: TH subscribes to InterconnectCOAlarm attribute from DUT"
      PICS: SMOKECO.S.A0009
      command: "subscribeAttribute"
      attribute: "InterconnectCOAlarm"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 26b: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect CO Alarm Test Event
          Clear"
      PICS: SMOKECO.S.A0009 && DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM_CLEAR

    - label:
          "Step 27: TH waits for a report of InterconnectCOAlarm attribute from
          DUT with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0009
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read interconnect-coalarm 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0009 DataVersion: 1795725838
          [TOO]   InterconnectCOAlarm: 0
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 28: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: HIEST_PRI_ALARM_4
          constraints:
              type: enum8

    - label:
          "Step 29a: TH subscribes to InterconnectSmokeAlarm attribute from DUT"
      PICS: SMOKECO.S.A0008
      command: "subscribeAttribute"
      attribute: "InterconnectSmokeAlarm"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 29b: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect Smoke Alarm Test
          Event Clear"
      PICS: SMOKECO.S.A0008 && DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM_CLEAR

    - label:
          "Step 30: TH waits for a report of InterconnectSmokeAlarm attribute
          from DUT with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0008
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read interconnect-smoke-alarm 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0008 DataVersion: 1795725838
          [TOO]   InterconnectSmokeAlarm: 0
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 31: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: HIEST_PRI_ALARM_5
          constraints:
              type: enum8

    - label: "Step 32a: TH subscribes to BatteryAlert attribute from DUT"
      PICS: SMOKECO.S.A0003
      command: "subscribeAttribute"
      attribute: "BatteryAlert"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 32b: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Battery Alert Test Event Clear"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_BATTERY_ALERT_CLEAR

    - label:
          "Step 33: TH waits for a report of BatteryAlert attribute from DUT
          with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read battery-alert 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838
          [TOO]   BatteryAlert: 0
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 34: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 0
          constraints:
              type: enum8