PairingCommand.cpp

/*
 *   Copyright (c) 2024 Project CHIP Authors
 *   All rights reserved.
 *
 *   Licensed under the Apache License, Version 2.0 (the "License");
 *   you may not use this file except in compliance with the License.
 *   You may obtain a copy of the License at
 *
 *       http://www.apache.org/licenses/LICENSE-2.0
 *
 *   Unless required by applicable law or agreed to in writing, software
 *   distributed under the License is distributed on an "AS IS" BASIS,
 *   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *   See the License for the specific language governing permissions and
 *   limitations under the License.
 *
 */

#include "PairingCommand.h"

#include <commands/common/DeviceScanner.h>
#include <controller/ExampleOperationalCredentialsIssuer.h>
#include <crypto/CHIPCryptoPAL.h>
#include <lib/core/CHIPSafeCasts.h>
#include <lib/support/logging/CHIPLogging.h>
#include <platform/PlatformManager.h>
#include <protocols/secure_channel/PASESession.h>
#include <setup_payload/ManualSetupPayloadParser.h>
#include <setup_payload/QRCodeSetupPayloadParser.h>

#include <string>

#if defined(PW_RPC_ENABLED)
#include <rpc/RpcClient.h>
#endif

using namespace ::chip;
using namespace ::chip::Controller;

CHIP_ERROR PairingCommand::RunCommand()
{
    CurrentCommissioner().RegisterPairingDelegate(this);
    // Clear the CATs in OperationalCredentialsIssuer
    mCredIssuerCmds->SetCredentialIssuerCATValues(kUndefinedCATs);

    mDeviceIsICD = false;

    if (mCASEAuthTags.HasValue() && mCASEAuthTags.Value().size() <= kMaxSubjectCATAttributeCount)
    {
        CATValues cats = kUndefinedCATs;
        for (size_t index = 0; index < mCASEAuthTags.Value().size(); ++index)
        {
            cats.values[index] = mCASEAuthTags.Value()[index];
        }
        if (cats.AreValid())
        {
            mCredIssuerCmds->SetCredentialIssuerCATValues(cats);
        }
    }
    return RunInternal(mNodeId);
}

CHIP_ERROR PairingCommand::RunInternal(NodeId remoteId)
{
    CHIP_ERROR err = CHIP_NO_ERROR;

    switch (mPairingMode)
    {
    case PairingMode::None:
        err = Unpair(remoteId);
        break;
    case PairingMode::Code:
        err = PairWithCode(remoteId);
        break;
    case PairingMode::CodePaseOnly:
        err = PaseWithCode(remoteId);
        break;
    case PairingMode::Ble:
        err = Pair(remoteId, PeerAddress::BLE());
        break;
    case PairingMode::OnNetwork:
        err = PairWithMdns(remoteId);
        break;
    case PairingMode::SoftAP:
        err = Pair(remoteId, PeerAddress::UDP(mRemoteAddr.address, mRemotePort, mRemoteAddr.interfaceId));
        break;
    case PairingMode::AlreadyDiscovered:
        err = Pair(remoteId, PeerAddress::UDP(mRemoteAddr.address, mRemotePort, mRemoteAddr.interfaceId));
        break;
    case PairingMode::AlreadyDiscoveredByIndex:
        err = PairWithMdnsOrBleByIndex(remoteId, mIndex);
        break;
    case PairingMode::AlreadyDiscoveredByIndexWithCode:
        err = PairWithMdnsOrBleByIndexWithCode(remoteId, mIndex);
        break;
    }

    return err;
}

CommissioningParameters PairingCommand::GetCommissioningParameters()
{
    auto params = CommissioningParameters();
    params.SetSkipCommissioningComplete(mSkipCommissioningComplete.ValueOr(false));
    if (mBypassAttestationVerifier.ValueOr(false))
    {
        params.SetDeviceAttestationDelegate(this);
    }

    switch (mNetworkType)
    {
    case PairingNetworkType::WiFi:
        params.SetWiFiCredentials(Controller::WiFiCredentials(mSSID, mPassword));
        break;
    case PairingNetworkType::Thread:
        params.SetThreadOperationalDataset(mOperationalDataset);
        break;
    case PairingNetworkType::None:
        break;
    }

    if (mCountryCode.HasValue())
    {
        params.SetCountryCode(CharSpan::fromCharString(mCountryCode.Value()));
    }

    // mTimeZoneList is an optional argument managed by TypedComplexArgument mComplex_TimeZones.
    // Since optional Complex arguments are not currently supported via the <chip::Optional> class,
    // we will use mTimeZoneList.data() value to determine if the argument was provided.
    if (mTimeZoneList.data())
    {
        params.SetTimeZone(mTimeZoneList);
    }

    // miDSTOffsetList is an optional argument managed by TypedComplexArgument mComplex_DSTOffsets.
    // Since optional Complex arguments are not currently supported via the <chip::Optional> class,
    // we will use mTimeZoneList.data() value to determine if the argument was provided.
    if (mDSTOffsetList.data())
    {
        params.SetDSTOffsets(mDSTOffsetList);
    }

    if (mICDRegistration.ValueOr(false))
    {
        params.SetICDRegistrationStrategy(ICDRegistrationStrategy::kBeforeComplete);

        if (!mICDSymmetricKey.HasValue())
        {
            chip::Crypto::DRBG_get_bytes(mRandomGeneratedICDSymmetricKey, sizeof(mRandomGeneratedICDSymmetricKey));
            mICDSymmetricKey.SetValue(ByteSpan(mRandomGeneratedICDSymmetricKey));
        }
        if (!mICDCheckInNodeId.HasValue())
        {
            mICDCheckInNodeId.SetValue(CurrentCommissioner().GetNodeId());
        }
        if (!mICDMonitoredSubject.HasValue())
        {
            mICDMonitoredSubject.SetValue(mICDCheckInNodeId.Value());
        }
        // These Optionals must have values now.
        // The commissioner will verify these values.
        params.SetICDSymmetricKey(mICDSymmetricKey.Value());
        if (mICDStayActiveDurationMsec.HasValue())
        {
            params.SetICDStayActiveDurationMsec(mICDStayActiveDurationMsec.Value());
        }
        params.SetICDCheckInNodeId(mICDCheckInNodeId.Value());
        params.SetICDMonitoredSubject(mICDMonitoredSubject.Value());
    }

    return params;
}

CHIP_ERROR PairingCommand::PaseWithCode(NodeId remoteId)
{
    auto discoveryType = DiscoveryType::kAll;
    if (mUseOnlyOnNetworkDiscovery.ValueOr(false))
    {
        discoveryType = DiscoveryType::kDiscoveryNetworkOnly;
    }

    if (mDiscoverOnce.ValueOr(false))
    {
        discoveryType = DiscoveryType::kDiscoveryNetworkOnlyWithoutPASEAutoRetry;
    }

    return CurrentCommissioner().EstablishPASEConnection(remoteId, mOnboardingPayload, discoveryType);
}

CHIP_ERROR PairingCommand::PairWithCode(NodeId remoteId)
{
    CommissioningParameters commissioningParams = GetCommissioningParameters();

    // If no network discovery behavior and no network credentials are provided, assume that the pairing command is trying to pair
    // with an on-network device.
    if (!mUseOnlyOnNetworkDiscovery.HasValue())
    {
        auto threadCredentials = commissioningParams.GetThreadOperationalDataset();
        auto wiFiCredentials   = commissioningParams.GetWiFiCredentials();
        mUseOnlyOnNetworkDiscovery.SetValue(!threadCredentials.HasValue() && !wiFiCredentials.HasValue());
    }

    auto discoveryType = DiscoveryType::kAll;
    if (mUseOnlyOnNetworkDiscovery.ValueOr(false))
    {
        discoveryType = DiscoveryType::kDiscoveryNetworkOnly;
    }

    if (mDiscoverOnce.ValueOr(false))
    {
        discoveryType = DiscoveryType::kDiscoveryNetworkOnlyWithoutPASEAutoRetry;
    }

    return CurrentCommissioner().PairDevice(remoteId, mOnboardingPayload, commissioningParams, discoveryType);
}

CHIP_ERROR PairingCommand::Pair(NodeId remoteId, PeerAddress address)
{
    auto params = RendezvousParameters().SetSetupPINCode(mSetupPINCode).SetDiscriminator(mDiscriminator).SetPeerAddress(address);

    CHIP_ERROR err = CHIP_NO_ERROR;
    if (mPaseOnly.ValueOr(false))
    {
        err = CurrentCommissioner().EstablishPASEConnection(remoteId, params);
    }
    else
    {
        auto commissioningParams = GetCommissioningParameters();
        err                      = CurrentCommissioner().PairDevice(remoteId, params, commissioningParams);
    }
    return err;
}

CHIP_ERROR PairingCommand::PairWithMdnsOrBleByIndex(NodeId remoteId, uint16_t index)
{
#if CHIP_DEVICE_LAYER_TARGET_DARWIN
    VerifyOrReturnError(IsInteractive(), CHIP_ERROR_INCORRECT_STATE);

    RendezvousParameters params;
    ReturnErrorOnFailure(GetDeviceScanner().Get(index, params));
    params.SetSetupPINCode(mSetupPINCode);

    CHIP_ERROR err = CHIP_NO_ERROR;
    if (mPaseOnly.ValueOr(false))
    {
        err = CurrentCommissioner().EstablishPASEConnection(remoteId, params);
    }
    else
    {
        auto commissioningParams = GetCommissioningParameters();
        err                      = CurrentCommissioner().PairDevice(remoteId, params, commissioningParams);
    }
    return err;
#else
    return CHIP_ERROR_NOT_IMPLEMENTED;
#endif // CHIP_DEVICE_LAYER_TARGET_DARWIN
}

CHIP_ERROR PairingCommand::PairWithMdnsOrBleByIndexWithCode(NodeId remoteId, uint16_t index)
{
#if CHIP_DEVICE_LAYER_TARGET_DARWIN
    VerifyOrReturnError(IsInteractive(), CHIP_ERROR_INCORRECT_STATE);

    Dnssd::CommonResolutionData resolutionData;
    auto err = GetDeviceScanner().Get(index, resolutionData);
    if (CHIP_ERROR_NOT_FOUND == err)
    {
        // There is no device with this index that has some resolution data. This could simply
        // be because the device is a ble device. In this case let's fall back to looking for
        // a device with this index and some RendezvousParameters.
        chip::SetupPayload payload;
        bool isQRCode = strncmp(mOnboardingPayload, kQRCodePrefix, strlen(kQRCodePrefix)) == 0;
        if (isQRCode)
        {
            ReturnErrorOnFailure(QRCodeSetupPayloadParser(mOnboardingPayload).populatePayload(payload));
            VerifyOrReturnError(payload.isValidQRCodePayload(), CHIP_ERROR_INVALID_ARGUMENT);
        }
        else
        {
            ReturnErrorOnFailure(ManualSetupPayloadParser(mOnboardingPayload).populatePayload(payload));
            VerifyOrReturnError(payload.isValidManualCode(), CHIP_ERROR_INVALID_ARGUMENT);
        }

        mSetupPINCode = payload.setUpPINCode;
        return PairWithMdnsOrBleByIndex(remoteId, index);
    }

    err = CHIP_NO_ERROR;
    if (mPaseOnly.ValueOr(false))
    {
        err = CurrentCommissioner().EstablishPASEConnection(remoteId, mOnboardingPayload, DiscoveryType::kDiscoveryNetworkOnly,
                                                            MakeOptional(resolutionData));
    }
    else
    {
        auto commissioningParams = GetCommissioningParameters();
        err                      = CurrentCommissioner().PairDevice(remoteId, mOnboardingPayload, commissioningParams,
                                                                    DiscoveryType::kDiscoveryNetworkOnly, MakeOptional(resolutionData));
    }
    return err;
#else
    return CHIP_ERROR_NOT_IMPLEMENTED;
#endif // CHIP_DEVICE_LAYER_TARGET_DARWIN
}

CHIP_ERROR PairingCommand::PairWithMdns(NodeId remoteId)
{
    Dnssd::DiscoveryFilter filter(mFilterType);
    switch (mFilterType)
    {
    case chip::Dnssd::DiscoveryFilterType::kNone:
        break;
    case chip::Dnssd::DiscoveryFilterType::kShortDiscriminator:
    case chip::Dnssd::DiscoveryFilterType::kLongDiscriminator:
    case chip::Dnssd::DiscoveryFilterType::kCompressedFabricId:
    case chip::Dnssd::DiscoveryFilterType::kVendorId:
    case chip::Dnssd::DiscoveryFilterType::kDeviceType:
        filter.code = mDiscoveryFilterCode;
        break;
    case chip::Dnssd::DiscoveryFilterType::kCommissioningMode:
        break;
    case chip::Dnssd::DiscoveryFilterType::kCommissioner:
        filter.code = 1;
        break;
    case chip::Dnssd::DiscoveryFilterType::kInstanceName:
        filter.code         = 0;
        filter.instanceName = mDiscoveryFilterInstanceName;
        break;
    }

    CurrentCommissioner().RegisterDeviceDiscoveryDelegate(this);
    return CurrentCommissioner().DiscoverCommissionableNodes(filter);
}

CHIP_ERROR PairingCommand::Unpair(NodeId remoteId)
{
    mCurrentFabricRemover = Platform::MakeUnique<Controller::CurrentFabricRemover>(&CurrentCommissioner());
    return mCurrentFabricRemover->RemoveCurrentFabric(remoteId, &mCurrentFabricRemoveCallback);
}

void PairingCommand::OnStatusUpdate(DevicePairingDelegate::Status status)
{
    switch (status)
    {
    case DevicePairingDelegate::Status::SecurePairingSuccess:
        ChipLogProgress(NotSpecified, "Secure Pairing Success");
        ChipLogProgress(NotSpecified, "CASE establishment successful");
        break;
    case DevicePairingDelegate::Status::SecurePairingFailed:
        ChipLogError(NotSpecified, "Secure Pairing Failed");
        SetCommandExitStatus(CHIP_ERROR_INCORRECT_STATE);
        break;
    }
}

void PairingCommand::OnPairingComplete(CHIP_ERROR err)
{
    if (err == CHIP_NO_ERROR)
    {
        ChipLogProgress(NotSpecified, "Pairing Success");
        ChipLogProgress(NotSpecified, "PASE establishment successful");
        if (mPairingMode == PairingMode::CodePaseOnly || mPaseOnly.ValueOr(false))
        {
            SetCommandExitStatus(err);
        }
    }
    else
    {
        ChipLogProgress(NotSpecified, "Pairing Failure: %s", ErrorStr(err));
    }

    if (err != CHIP_NO_ERROR)
    {
        SetCommandExitStatus(err);
    }
}

void PairingCommand::OnPairingDeleted(CHIP_ERROR err)
{
    if (err == CHIP_NO_ERROR)
    {
        ChipLogProgress(NotSpecified, "Pairing Deleted Success");
    }
    else
    {
        ChipLogProgress(NotSpecified, "Pairing Deleted Failure: %s", ErrorStr(err));
    }

    SetCommandExitStatus(err);
}

void PairingCommand::OnCommissioningComplete(NodeId nodeId, CHIP_ERROR err)
{
    if (err == CHIP_NO_ERROR)
    {
        fprintf(stderr, "New device with Node ID: 0x%lx has been successfully added.\n", nodeId);

#if defined(PW_RPC_ENABLED)
        AddSynchronizedDevice(nodeId);
#endif
    }
    else
    {
        // When ICD device commissioning fails, the ICDClientInfo stored in OnICDRegistrationComplete needs to be removed.
        if (mDeviceIsICD)
        {
            CHIP_ERROR deleteEntryError =
                CHIPCommand::sICDClientStorage.DeleteEntry(ScopedNodeId(mNodeId, CurrentCommissioner().GetFabricIndex()));
            if (deleteEntryError != CHIP_NO_ERROR)
            {
                ChipLogError(NotSpecified, "Failed to delete ICD entry: %s", ErrorStr(err));
            }
        }
        ChipLogProgress(NotSpecified, "Device commissioning Failure: %s", ErrorStr(err));
    }

    SetCommandExitStatus(err);
}

void PairingCommand::OnReadCommissioningInfo(const Controller::ReadCommissioningInfo & info)
{
    ChipLogProgress(AppServer, "OnReadCommissioningInfo - vendorId=0x%04X productId=0x%04X", info.basic.vendorId,
                    info.basic.productId);

    // The string in CharSpan received from the device is not null-terminated, we use std::string here for coping and
    // appending a numm-terminator at the end of the string.
    std::string userActiveModeTriggerInstruction;

    // Note: the callback doesn't own the buffer, should make a copy if it will be used it later.
    if (info.icd.userActiveModeTriggerInstruction.size() != 0)
    {
        userActiveModeTriggerInstruction =
            std::string(info.icd.userActiveModeTriggerInstruction.data(), info.icd.userActiveModeTriggerInstruction.size());
    }

    if (info.icd.userActiveModeTriggerHint.HasAny())
    {
        ChipLogProgress(AppServer, "OnReadCommissioningInfo - LIT UserActiveModeTriggerHint=0x%08x",
                        info.icd.userActiveModeTriggerHint.Raw());
        ChipLogProgress(AppServer, "OnReadCommissioningInfo - LIT UserActiveModeTriggerInstruction=%s",
                        userActiveModeTriggerInstruction.c_str());
    }
    ChipLogProgress(AppServer, "OnReadCommissioningInfo ICD - IdleModeDuration=%u activeModeDuration=%u activeModeThreshold=%u",
                    info.icd.idleModeDuration, info.icd.activeModeDuration, info.icd.activeModeThreshold);
}

void PairingCommand::OnICDRegistrationComplete(ScopedNodeId nodeId, uint32_t icdCounter)
{
    char icdSymmetricKeyHex[chip::Crypto::kAES_CCM128_Key_Length * 2 + 1];

    chip::Encoding::BytesToHex(mICDSymmetricKey.Value().data(), mICDSymmetricKey.Value().size(), icdSymmetricKeyHex,
                               sizeof(icdSymmetricKeyHex), chip::Encoding::HexFlags::kNullTerminate);

    app::ICDClientInfo clientInfo;
    clientInfo.peer_node         = nodeId;
    clientInfo.monitored_subject = mICDMonitoredSubject.Value();
    clientInfo.start_icd_counter = icdCounter;

    CHIP_ERROR err = CHIPCommand::sICDClientStorage.SetKey(clientInfo, mICDSymmetricKey.Value());
    if (err == CHIP_NO_ERROR)
    {
        err = CHIPCommand::sICDClientStorage.StoreEntry(clientInfo);
    }

    if (err != CHIP_NO_ERROR)
    {
        CHIPCommand::sICDClientStorage.RemoveKey(clientInfo);
        ChipLogError(NotSpecified, "Failed to persist symmetric key for " ChipLogFormatX64 ": %s",
                     ChipLogValueX64(nodeId.GetNodeId()), err.AsString());
        SetCommandExitStatus(err);
        return;
    }

    mDeviceIsICD = true;

    ChipLogProgress(NotSpecified, "Saved ICD Symmetric key for " ChipLogFormatX64, ChipLogValueX64(nodeId.GetNodeId()));
    ChipLogProgress(NotSpecified,
                    "ICD Registration Complete for device " ChipLogFormatX64 " / Check-In NodeID: " ChipLogFormatX64
                    " / Monitored Subject: " ChipLogFormatX64 " / Symmetric Key: %s / ICDCounter %u",
                    ChipLogValueX64(nodeId.GetNodeId()), ChipLogValueX64(mICDCheckInNodeId.Value()),
                    ChipLogValueX64(mICDMonitoredSubject.Value()), icdSymmetricKeyHex, icdCounter);
}

void PairingCommand::OnICDStayActiveComplete(ScopedNodeId deviceId, uint32_t promisedActiveDuration)
{
    ChipLogProgress(NotSpecified, "ICD Stay Active Complete for device " ChipLogFormatX64 " / promisedActiveDuration: %u",
                    ChipLogValueX64(deviceId.GetNodeId()), promisedActiveDuration);
}

void PairingCommand::OnDiscoveredDevice(const chip::Dnssd::CommissionNodeData & nodeData)
{
    // Ignore nodes with closed commissioning window
    VerifyOrReturn(nodeData.commissioningMode != 0);

    auto & resolutionData = nodeData;

    const uint16_t port = resolutionData.port;
    char buf[chip::Inet::IPAddress::kMaxStringLength];
    resolutionData.ipAddress[0].ToString(buf);
    ChipLogProgress(NotSpecified, "Discovered Device: %s:%u", buf, port);

    // Stop Mdns discovery.
    auto err = CurrentCommissioner().StopCommissionableDiscovery();

    // Some platforms does not implement a mechanism to stop mdns browse, so
    // we just ignore CHIP_ERROR_NOT_IMPLEMENTED instead of bailing out.
    if (CHIP_NO_ERROR != err && CHIP_ERROR_NOT_IMPLEMENTED != err)
    {
        SetCommandExitStatus(err);
        return;
    }

    CurrentCommissioner().RegisterDeviceDiscoveryDelegate(nullptr);

    auto interfaceId = resolutionData.ipAddress[0].IsIPv6LinkLocal() ? resolutionData.interfaceId : Inet::InterfaceId::Null();
    auto peerAddress = PeerAddress::UDP(resolutionData.ipAddress[0], port, interfaceId);
    err              = Pair(mNodeId, peerAddress);
    if (CHIP_NO_ERROR != err)
    {
        SetCommandExitStatus(err);
    }
}

void PairingCommand::OnCurrentFabricRemove(void * context, NodeId nodeId, CHIP_ERROR err)
{
    PairingCommand * command = reinterpret_cast<PairingCommand *>(context);
    VerifyOrReturn(command != nullptr, ChipLogError(NotSpecified, "OnCurrentFabricRemove: context is null"));

    if (err == CHIP_NO_ERROR)
    {
        ChipLogProgress(NotSpecified, "Device unpair completed with success: " ChipLogFormatX64, ChipLogValueX64(nodeId));
    }
    else
    {
        ChipLogProgress(NotSpecified, "Device unpair Failure: " ChipLogFormatX64 " %s", ChipLogValueX64(nodeId), ErrorStr(err));
    }

    command->SetCommandExitStatus(err);
}

chip::Optional<uint16_t> PairingCommand::FailSafeExpiryTimeoutSecs() const
{
    // We don't need to set additional failsafe timeout as we don't ask the final user if he wants to continue
    return chip::Optional<uint16_t>();
}

void PairingCommand::OnDeviceAttestationCompleted(chip::Controller::DeviceCommissioner * deviceCommissioner,
                                                  chip::DeviceProxy * device,
                                                  const chip::Credentials::DeviceAttestationVerifier::AttestationDeviceInfo & info,
                                                  chip::Credentials::AttestationVerificationResult attestationResult)
{
    // Bypass attestation verification, continue with success
    auto err = deviceCommissioner->ContinueCommissioningAfterDeviceAttestation(
        device, chip::Credentials::AttestationVerificationResult::kSuccess);
    if (CHIP_NO_ERROR != err)
    {
        SetCommandExitStatus(err);
    }
}