Test_TC_CNET_4_2.yaml

# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    12.4.2. [TC-CNET-4.2] [Thread] Verification for attributes check
    [DUT-Server]

PICS:
    - CNET.S.F01

config:
    nodeId: 0x12344321
    cluster: "Network Commissioning"
    #PIXIT.CNET.ENDPOINT_THREAD
    endpoint: 0
    PIXIT.CNET.THREAD_1ST_OPERATIONALDATASET:
        type: octet_string
        defaultValue: "hex:1111111122222222"

tests:
    - label: "Step 1: Factory reset the DUT"
      verification: |
          Reset Devices to factory defaults
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: "Factory Reset the DUT and enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    #Issue: https://github.com/project-chip/connectedhomeip/issues/30196
    - label: "Step 2: Commission TH and DUT on Thread network"
      verification: |
          ./chip-tool pairing ble-thread 0x12344321 <operationalDataset> <setup-pin-code> <discriminator>

          [1698660637.937566][6429:6431] CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_0030 Command=0x0000_0005
          [1698660637.937644][6429:6431] CHIP:CTL: Received CommissioningComplete response, errorCode=0
          [1698660637.937705][6429:6431] CHIP:CTL: Successfully finished commissioning step 'SendComplete'
          [1698660637.937750][6429:6431] CHIP:CTL: Commissioning stage next step: 'SendComplete' -> 'Cleanup'
          [1698660637.937812][6429:6431] CHIP:CTL: Performing next commissioning step 'Cleanup'
          [1698660637.937863][6429:6431] CHIP:DIS: Closing all BLE connections
          [1698660637.937911][6429:6431] CHIP:IN: Clearing BLE pending packets.
          [1698660637.938582][6429:6431] CHIP:BLE: Auto-closing end point's BLE connection.
          [1698660637.938645][6429:6431] CHIP:DL: Closing BLE GATT connection (con 0xffff9c034bb0)
          [1698660637.938805][6429:6430] CHIP:DL: Close BLE connection: peer=F7:D4:24:D2:4A:1F
          [1698660638.365208][6429:6431] CHIP:IN: SecureSession[0xffff9400f900]: MarkForEviction Type:1 LSID:62220
          [1698660638.365311][6429:6431] CHIP:SC: SecureSession[0xffff9400f900, LSID:62220]: State change 'kActive' --> 'kPendingEviction'
          [1698660638.365440][6429:6431] CHIP:IN: SecureSession[0xffff9400f900]: Released - Type:1 LSID:62220
          [1698660638.365529][6429:6431] CHIP:CTL: Successfully finished commissioning step 'Cleanup'
          [1698660638.365598][6429:6431] CHIP:TOO: Device commissioning completed with success
          [1698660638.365873][6429:6431] CHIP:DMG: ICR moving to [AwaitingDe]
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: enter 'y' after successfull Commission"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 3: TH reads Descriptor Cluster from the DUT with EP0 TH reads
          ServerList from the DUT"
      cluster: "Descriptor"
      command: "readAttribute"
      attribute: "ServerList"
      response:
          constraints:
              type: list
              contains: [49]

    - label: "Step 4: TH reads FeatureMap attribute from the DUT"
      command: "readAttribute"
      attribute: "FeatureMap"
      response:
          value: 2
          constraints:
              type: bitmap32

    - label:
          "Step 5 & 6: TH reads the MaxNetworks attribute from the DUT. TH saves
          the MaxNetworks attribute value as 'MaxNetworksValue' for future use"
      PICS: CNET.S.A0000
      command: "readAttribute"
      attribute: "MaxNetworks"
      response:
          saveAs: MaxNetworksValue
          constraints:
              type: int8u
              minValue: 1
              maxValue: 255

    - label: "Step 7: TH reads the Networks attribute list from the DUT"
      PICS: CNET.S.A0001
      command: "readAttribute"
      attribute: "Networks"
      response:
          constraints:
              contains:
                  [
                      {
                          NetworkID: PIXIT.CNET.THREAD_1ST_OPERATIONALDATASET,
                          Connected: true,
                      },
                  ]

    - label: "Step 8: TH reads ScanMaxTimeSeconds attribute from the DUT"
      PICS: CNET.S.A0002
      command: "readAttribute"
      attribute: "ScanMaxTimeSeconds"
      response:
          constraints:
              type: int8u
              minValue: 1
              maxValue: 255

    - label: "Step 9: TH reads ConnectMaxTimeSeconds attribute from the DUT"
      PICS: CNET.S.A0003
      command: "readAttribute"
      attribute: "ConnectMaxTimeSeconds"
      response:
          constraints:
              type: int8u
              minValue: 1
              maxValue: 255

    - label: "Step 10: TH reads InterfaceEnabled attribute from the DUT"
      PICS: CNET.S.A0004
      command: "readAttribute"
      attribute: "InterfaceEnabled"
      response:
          value: true
          constraints:
              type: boolean

    - label: "Step 11: TH reads LastNetworkingStatus attribute from the DUT"
      PICS: CNET.S.A0005
      command: "readAttribute"
      attribute: "LastNetworkingStatus"
      response:
          value: 0
          constraints:
              type: NetworkCommissioningStatusEnum

    - label:
          "Step 12a: TH reads the LastNetworkID attribute from the DUT. TH reads
          the Networks attribute from the DUT"
      PICS: CNET.S.A0006
      command: "readAttribute"
      attribute: "LastNetworkID"
      response:
          value: PIXIT.CNET.THREAD_1ST_OPERATIONALDATASET
          constraints:
              type: octet_string
              minLength: 1
              maxLength: 32

    - label: "Step 12b: TH reads the Networks attribute list from the DUT"
      PICS: CNET.S.A0001
      command: "readAttribute"
      attribute: "Networks"
      response:
          constraints:
              contains:
                  [
                      {
                          NetworkID: PIXIT.CNET.THREAD_1ST_OPERATIONALDATASET,
                          Connected: true,
                      },
                  ]

    - label:
          "Step 13: TH reads the LastConnectErrorValue attribute from the DUT"
      PICS: CNET.S.A0007
      command: "readAttribute"
      attribute: "LastConnectErrorValue"
      response:
          value: null
          constraints:
              type: int32s

    #Possibilites if Bit 4 (IsSynchronizedSleepyEndDeviceCapable) is only set if bit 2 (IsSleepyEndDeviceCapable) is also set expects value 20
    #Verify that Bit 0 (IsBorderRouterCapable) is only set if bit 3 (IsFullThreadDevice) is also set expected value 9
    #Verify that Bit 1 (IsRouterCapable) is only set if bit 3 (IsFullThreadDevice) is also set expected value 10
    #So the possibilites of value here are in the range of 0-20 expected value as per test-plan [0, 4, 8, 9, 10, 16, 20]
    - label:
          "Step 14: TH reads the SupportedThreadFeatures attribute from the DUT"
      PICS: CNET.S.A0009
      command: "readAttribute"
      attribute: "SupportedThreadFeatures"
      response:
          constraints:
              type: bitmap16
              anyOf: [0, 4, 8, 9, 10, 16, 20]

    - label: "Step 15:TH reads the ThreadVersion attribute from the DUT"
      PICS: CNET.S.A000A
      command: "readAttribute"
      attribute: "ThreadVersion"
      response:
          constraints:
              type: int16u
              minValue: 4