Test_TC_LVL_5_1.yaml

# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: 24.5.1. [TC-LVL-5.1] Step Verification (DUT as Server)

PICS:
    - LVL.S

config:
    nodeId: 0x12344321
    cluster: "Level Control"
    endpoint: 1

tests:
    - label:
          "Commission DUT to TH (can be skipped if done in a preceding test)."
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "Precondition Send On Command"
      cluster: "On/Off"
      PICS: OO.S.C01.Rsp
      command: "On"

    - label: "Check on/off attribute value is true after on command"
      cluster: "On/Off"
      PICS: OO.S.A0000
      command: "readAttribute"
      attribute: "OnOff"
      response:
          value: 1

    #Adding below step resolve the issue https://github.com/CHIP-Specifications/chip-certification-tool/issues/499
    - label:
          "Precondition: write default value of OnOffTransitionTime attribute"
      PICS: LVL.S.A0010
      command: "writeAttribute"
      attribute: "OnOffTransitionTime"
      arguments:
          value: 0

    - label: "Step 1: TH writes 0x00 to the Options attribute"
      PICS: LVL.S.A000f
      command: "writeAttribute"
      attribute: "Options"
      arguments:
          value: 0

    - label: "Step 2a: TH sends Off command to DUT"
      cluster: "On/Off"
      PICS: OO.S.C00.Rsp && LVL.S.C06.Rsp
      command: "Off"

    - label:
          "Step 2b: TH sends a StepWithOnOff command to DUT, with StepMode =0x00
          (up), StepSize =50 and TransitionTime =0 (immediate)"
      PICS: LVL.S.C06.Rsp
      command: "StepWithOnOff"
      arguments:
          values:
              - name: "StepMode"
                value: 0
              - name: "StepSize"
                value: 50
              - name: "TransitionTime"
                value: 0
              - name: "OptionsMask"
                value: 0
              - name: "OptionsOverride"
                value: 0

    - label: "Step 2c: TH reads OnOff attribute (On/Off cluster) from DUT"
      cluster: "On/Off"
      PICS: OO.S.A0000 && LVL.S.C06.Rsp
      command: "readAttribute"
      attribute: "OnOff"
      response:
          value: 1

    - label: "Step 3a: TH sends On command to DUT"
      cluster: "On/Off"
      PICS: OO.S.C01.Rsp
      command: "On"

    - label:
          "Step 3b: TH sends a MoveToLevel command to DUT, with Level =50 and
          TransitionTime =0 (immediate)"
      PICS: LVL.S.C00.Rsp
      command: "MoveToLevel"
      arguments:
          values:
              - name: "Level"
                value: 50
              - name: "TransitionTime"
                value: 0
              - name: "OptionsMask"
                value: 0
              - name: "OptionsOverride"
                value: 0

    - label: "Step 3c: Reads current level attribute from DUT"
      PICS: LVL.S.A0000 && LVL.S.C00.Rsp
      command: "readAttribute"
      attribute: "CurrentLevel"
      response:
          value: 50

    - label:
          "Step 4a: TH sends a Step command to the DUT with StepMode_ =0x00
          (up), StepSize =150 and TransitionTime =300 (30 s). This means the
          level should increase by 150 units in 30s, so 5 units/s."
      PICS: LVL.S.C02.Rsp
      command: "Step"
      arguments:
          values:
              - name: "StepMode"
                value: 0
              - name: "StepSize"
                value: 150
              - name: "TransitionTime"
                value: 300
              - name: "OptionsMask"
                value: 0
              - name: "OptionsOverride"
                value: 0

    - label: "Wait 10s"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 10000

    - label:
          "Step 4b: After 10 seconds, TH reads CurrentLevel attribute from DUT"
      PICS: LVL.S.C02.Rsp && LVL.S.A0000 && LVL.S.M.VarRate
      command: "readAttribute"
      attribute: "CurrentLevel"
      response:
          constraints:
              minValue: 85
              maxValue: 115

    - label: "Wait 10s"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 10000

    - label:
          "Step 4c: After another 10 seconds, TH reads CurrentLevel attribute
          from DUT"
      PICS: LVL.S.C02.Rsp && LVL.S.A0000 && LVL.S.M.VarRate
      command: "readAttribute"
      attribute: "CurrentLevel"
      response:
          constraints:
              minValue: 127
              maxValue: 173

    - label: "Wait 10s"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 10000

    - label:
          "Step 4d: After another 10 seconds, TH reads CurrentLevel attribute
          from DUT"
      PICS: LVL.S.C02.Rsp && LVL.S.A0000 && LVL.S.M.VarRate
      command: "readAttribute"
      attribute: "CurrentLevel"
      response:
          constraints:
              minValue: 170
              maxValue: 200

    - label: "Wait 5000ms"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 5000

    - label:
          "Step 4e: After another 5 seconds, TH reads CurrentLevel attribute
          from DUT"
      PICS: LVL.S.C02.Rsp && LVL.S.A0000 && LVL.S.M.VarRate
      command: "readAttribute"
      attribute: "CurrentLevel"
      response:
          value: 200

    - label:
          "Step 4f: TH reads CurrentLevel attribute from DUT (after DUT has
          finished the transition)"
      PICS: LVL.S.C02.Rsp && LVL.S.A0000 && !LVL.S.M.VarRate
      command: "readAttribute"
      attribute: "CurrentLevel"
      response:
          value: 200

    - label: "Precondition send Off Command"
      cluster: "On/Off"
      PICS: OO.S.C00.Rsp
      command: "Off"

    - label: "Check on/off attribute value is false after off command"
      cluster: "On/Off"
      PICS: OO.S.A0000
      command: "readAttribute"
      attribute: "OnOff"
      response:
          value: 0