Test_TC_LVL_7_1.yaml

# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    22.6.2. [TC-LVL-7.1] Verification of MoveToClosestFrequency command (DUT as
    Server)

PICS:
    - LVL.S
    - LVL.S.F02

config:
    nodeId: 0x12344321
    cluster: "Level Control"
    endpoint: 1
    RandomLevelValue:
        type: int8u
        defaultValue: 100
    RandomFrequencyValue:
        type: int16u
        defaultValue: 30000

tests:
    - label:
          "Commission DUT to TH (can be skipped if done in a preceding test)."
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    #Adding below step resolve the issue https://github.com/CHIP-Specifications/chip-certification-tool/issues/499
    - label:
          "Precondition: write default value of OnOffTransitionTime attribute"
      PICS: LVL.S.A0010
      command: "writeAttribute"
      attribute: "OnOffTransitionTime"
      arguments:
          value: 0

    - label: "Step 0a: TH writes 0x00 to the Options attribute"
      PICS: LVL.S.A000f
      command: "writeAttribute"
      attribute: "Options"
      arguments:
          value: 0

    - label: "Step 0b: TH sends On command to DUT"
      cluster: "On/Off"
      PICS: OO.S.C01.Rsp
      command: "On"

    - label: "Step 1a: TH reads the MinLevel attribute from the DUT"
      PICS: LVL.S.A0002
      command: "readAttribute"
      attribute: "MinLevel"
      response:
          saveAs: minLevelValue
          constraints:
              type: int8u
              minValue: 0
              maxValue: 254

    - label: "Step 1b: TH reads the MaxLevel attribute from the DUT"
      PICS: LVL.S.A0003
      command: "readAttribute"
      attribute: "MaxLevel"
      response:
          saveAs: maxLevelValue
          constraints:
              type: int8u
              minValue: 0
              maxValue: 254

    - label:
          "Step 1c: TH sends a MoveToLevel command to DUT, with the Level field
          set to a value between the MinLevel and MaxLevel values (if present,
          otherwise between 0x01 and 0xFE) and the TransitionTime field set to
          0x0000 (move immediately)."
      PICS: LVL.S.C00.Rsp
      command: "MoveToLevel"
      arguments:
          values:
              - name: "Level"
                value: RandomLevelValue
              - name: "TransitionTime"
                value: 0
              - name: "OptionsMask"
                value: 0
              - name: "OptionsOverride"
                value: 0

    - label: "Wait 100ms"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 100

    - label: "Step 1d: TH reads CurrentLevel attribute from DUT"
      PICS: LVL.S.C00.Rsp && LVL.S.A0000
      command: "readAttribute"
      attribute: "CurrentLevel"
      response:
          value: RandomLevelValue

    - label: "Step 2a: TH reads the CurrentFrequency attribute."
      PICS: LVL.S.A0004
      command: "readAttribute"
      attribute: "CurrentFrequency"
      response:
          saveAs: CurrentFrequencyValue
          constraints:
              type: int16u
              minValue: 0
              maxValue: 65535

    - label: "Step 2b: TH reads the MinFrequency attribute."
      PICS: LVL.S.A0005
      command: "readAttribute"
      attribute: "MinFrequency"
      response:
          saveAs: MinFrequencyValue
          constraints:
              type: int16u
              minValue: 0
              maxValue: 65535

    - label:
          "Step 2c: TH reads the MaxFrequency attribute and check, if fmax <
          fmin, FAIL the test."
      PICS: LVL.S.A0006
      command: "readAttribute"
      attribute: "MaxFrequency"
      response:
          saveAs: MaxFrequencyValue
          constraints:
              type: int16u
              minValue: MinFrequencyValue
              maxValue: 65535

    - label:
          "Step 2d: sanity check on values read in steps 2a..2c, if fc < fmin,
          FAIL the test and fc > fmax, FAIL the test"
      PICS: LVL.S.A0004
      command: "readAttribute"
      attribute: "CurrentFrequency"
      response:
          constraints:
              type: int16u
              minValue: MinFrequencyValue
              maxValue: MaxFrequencyValue

    - label:
          "Step 3a: TH sends a MoveToClosestFrequency command to DUT, with the
          frequency field set to a random value frand, chosen such that: fmin <
          frand < fmax"
      PICS: LVL.S.C08.Rsp
      command: "MoveToClosestFrequency"
      arguments:
          values:
              - name: "Frequency"
                value: RandomFrequencyValue

    - label: "Wait 100ms"
      cluster: "DelayCommands"
      command: "WaitForMs"
      arguments:
          values:
              - name: "ms"
                value: 100

    - label: "Step 3b: TH reads the CurrentFrequency attribute."
      PICS: LVL.S.C08.Rsp && LVL.S.A0004
      command: "readAttribute"
      attribute: "CurrentFrequency"
      response:
          value: RandomFrequencyValue

    - label:
          "Step 4a: TH sends a MoveToClosestFrequency command to DUT, with the
          frequency field set to fmax + 1"
      PICS: LVL.S.C08.Rsp && PICS_USER_PROMPT
      verification: |
          Frequency feature is Optional & is not verifiable at this moment. Please skip this step
      cluster: "LogCommands"
      command: "UserPrompt"
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 4b: TH reads the CurrentFrequency attribute."
      PICS: LVL.S.C08.Rsp && LVL.S.A0004 && PICS_USER_PROMPT
      command: "readAttribute"
      attribute: "CurrentFrequency"
      response:
          value: RandomFrequencyValue

    - label:
          "Step 5a: TH sends a MoveToClosestFrequency command to DUT, with the
          frequency field set to fmin - 1"
      PICS: LVL.S.C08.Rsp && PICS_USER_PROMPT
      verification: |
          Frequency feature is Optional & is not verifiable at this moment. Please skip this step
      cluster: "LogCommands"
      command: "UserPrompt"
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 5b: TH reads the CurrentFrequency attribute."
      PICS: LVL.S.C08.Rsp && LVL.S.A0004 && PICS_USER_PROMPT
      command: "readAttribute"
      attribute: "CurrentFrequency"
      response:
          value: RandomFrequencyValue