Test_TC_SMOKECO_2_4.yaml

# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name:
    4.2.4. [TC-SMOKECO-2.4] Secondary Functionality - Mandatory with DUT as
    Server

PICS:
    - SMOKECO.S

config:
    nodeId: 0x12344321
    cluster: "Smoke CO Alarm"
    endpoint: 1
    timeout: 2910
    TEST_EVENT_TRIGGER_KEY:
        type: octet_string
        defaultValue: "hex:00112233445566778899aabbccddeeff"
    TEST_EVENT_TRIGGER_WARNING_BATTERY_ALERT:
        type: int64u
        defaultValue: "0xffffffff00000095"
    TEST_EVENT_TRIGGER_CRITICAL_BATTERY_ALERT:
        type: int64u
        defaultValue: "0xffffffff0000009e"
    TEST_EVENT_TRIGGER_BATTERY_ALERT_CLEAR:
        type: int64u
        defaultValue: "0xffffffff000000a5"
    TEST_EVENT_TRIGGER_HARDWARE_FAULT_ALERT:
        type: int64u
        defaultValue: "0xffffffff00000093"
    TEST_EVENT_TRIGGER_HARDWARE_FAULT_ALERT_CLEAR:
        type: int64u
        defaultValue: "0xffffffff000000a3"
    TEST_EVENT_TRIGGER_END_OF_SERVICE_ALERT:
        type: int64u
        defaultValue: "0xffffffff0000009a"
    TEST_EVENT_TRIGGER_END_OF_SERVICE_ALERT_CLEAR:
        type: int64u
        defaultValue: "0xffffffff000000aa"

tests:
    - label: "Step 1: Commission DUT to TH"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "Step 2: TH subscribes to BatteryAlert attribute from DUT"
      PICS: SMOKECO.S.A0003
      command: "subscribeAttribute"
      attribute: "BatteryAlert"
      minInterval: 1
      maxInterval: 900
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 3: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 0
          constraints:
              type: enum8

    - label: "TH gets last event number from DUT"
      PICS: SMOKECO.S.E0a
      command: "readEvent"
      event: "AllClear"

    - label:
          "Step 4: TH reads TestEventTriggersEnabled attribute from General
          Diagnostics Cluster"
      PICS: DGGEN.S.A0008
      cluster: "General Diagnostics"
      endpoint: 0
      command: "readAttribute"
      attribute: "TestEventTriggersEnabled"
      response:
          value: 1

    - label:
          "Step 5: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning Battery Alert Test Event"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_WARNING_BATTERY_ALERT

    - label:
          "Step 6: TH waits for a report of BatteryAlert attribute from DUT with
          a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read battery-alert 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838
          [TOO]   BatteryAlert: 1
          [1692340991.009882][1860:1862] CHIP:EM: <<< [E:56796i S:13603 M:58223585 (Ack:16238538)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck)
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 7: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 3
          constraints:
              type: enum8

    - label: "Step 8: TH reads LowBattery event from DUT"
      PICS: SMOKECO.S.E02
      command: "readEvent"
      event: "LowBattery"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: { AlarmSeverityLevel: 1 }

    - label:
          "Step 9: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Critical Battery Alert Test Event"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_CRITICAL_BATTERY_ALERT

    - label:
          "Step 10: TH waits for a report of BatteryAlert attribute from DUT
          with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read battery-alert 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838
          [TOO]   BatteryAlert: 2
          [1692340991.009882][1860:1862] CHIP:EM: <<< [E:56796i S:13603 M:58223585 (Ack:16238538)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck)
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 11: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 3
          constraints:
              type: enum8

    - label: "Step 12: TH reads LowBattery event from DUT"
      PICS: SMOKECO.S.E02
      command: "readEvent"
      event: "LowBattery"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: { AlarmSeverityLevel: 2 }

    - label:
          "Step 13: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Battery Alert Test Event Clear"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_BATTERY_ALERT_CLEAR

    - label:
          "Step 14: TH waits for a report of BatteryAlert attribute from DUT
          with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read battery-alert 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838
          [TOO]   BatteryAlert: 0
          [1692340991.009882][1860:1862] CHIP:EM: <<< [E:56796i S:13603 M:58223585 (Ack:16238538)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck)
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 15: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 16: TH reads AllClear event from DUT"
      PICS: SMOKECO.S.E0a
      command: "readEvent"
      event: "AllClear"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: {}

    - label: "Step 17: TH subscribes to HardwareFaultAlert attribute from DUT"
      PICS: SMOKECO.S.A0006
      command: "subscribeAttribute"
      attribute: "HardwareFaultAlert"
      minInterval: 1
      maxInterval: 900
      response:
          value: 0
          constraints:
              type: boolean

    - label:
          "Step 18: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Hardware Fault Alert Test Event"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_HARDWARE_FAULT_ALERT

    - label:
          "Step 19: TH waits for a report of HardwareFaultAlert attribute from
          DUT with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0006
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read hardware-fault-alert 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0006 DataVersion: 1795725838
          [TOO]   HardwareFaultAlert: TRUE
          [1692341722.458322][1923:1925] CHIP:EM: <<< [E:13580i S:23647 M:42886390 (Ack:222437492)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck)
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 20: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 5
          constraints:
              type: enum8

    - label: "Step 21: TH reads HardwareFault event from DUT"
      PICS: SMOKECO.S.E03
      command: "readEvent"
      event: "HardwareFault"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: {}

    - label:
          "Step 22: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Hardware Fault Alert Test Event
          Clear"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_HARDWARE_FAULT_ALERT_CLEAR

    - label:
          "Step 23: TH waits for a report of HardwareFaultAlert attribute from
          DUT with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0006
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read hardware-fault-alert 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0006 DataVersion: 1795725838
          [TOO]   HardwareFaultAlert: FALSE
          [1692341722.458322][1923:1925] CHIP:EM: <<< [E:13580i S:23647 M:42886390 (Ack:222437492)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck)
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 24: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 25: TH reads AllClear event from DUT"
      PICS: SMOKECO.S.E0a
      command: "readEvent"
      event: "AllClear"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: {}

    - label: "Step 26: TH subscribes to EndOfServiceAlert attribute from DUT"
      PICS: SMOKECO.S.A0007
      command: "subscribeAttribute"
      attribute: "EndOfServiceAlert"
      minInterval: 1
      maxInterval: 900
      response:
          value: 0
          constraints:
              type: enum8

    - label:
          "Step 27: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for End of Service Alert Test Event"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_END_OF_SERVICE_ALERT

    - label:
          "Step 28: TH waits for a report of EndOfServiceAlert attribute from
          DUT with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0007
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read end-of-service-alert 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0007 DataVersion: 1795725838
          [TOO]   EndOfServiceAlert: 1
          [1692342076.348701][1956:1958] CHIP:EM: <<< [E:51164i S:58720 M:186716445 (Ack:135114063)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck)
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 29: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 6
          constraints:
              type: enum8

    - label: "Step 30: TH reads EndOfService event from DUT"
      PICS: SMOKECO.S.E04
      command: "readEvent"
      event: "EndOfService"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: {}

    - label:
          "Step 31: TH sends TestEventTrigger command to General Diagnostics
          Cluster on Endpoint 0 with EnableKey field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to
          PIXIT.SMOKECO.TEST_EVENT_TRIGGER for End of Service Alert Test Event
          Clear"
      PICS: DGGEN.S.C00.Rsp
      cluster: "General Diagnostics"
      endpoint: 0
      command: "TestEventTrigger"
      arguments:
          values:
              - name: "EnableKey"
                value: TEST_EVENT_TRIGGER_KEY
              - name: "EventTrigger"
                value: TEST_EVENT_TRIGGER_END_OF_SERVICE_ALERT_CLEAR

    - label:
          "Step 32: TH waits for a report of EndOfServiceAlert attribute from
          DUT with a timeout of 300 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0007
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read end-of-service-alert 1 1

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0007 DataVersion: 1795725838
          [TOO]   EndOfServiceAlert: 0
          [1692342076.348701][1956:1958] CHIP:EM: <<< [E:51164i S:58720 M:186716445 (Ack:135114063)] (S) Msg TX to 1:0000000000000001 [3304] --- Type 0000:10 (SecureChannel:StandaloneAck)
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 33: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 34: TH reads AllClear event from DUT"
      PICS: SMOKECO.S.E0a
      command: "readEvent"
      event: "AllClear"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: {}

    - label: "Step 35: TH subscribes to TestInProgress attribute from DUT"
      PICS: SMOKECO.S.A0005
      command: "subscribeAttribute"
      attribute: "TestInProgress"
      minInterval: 1
      maxInterval: 900
      response:
          value: 0
          constraints:
              type: boolean

    - label: "Step 36: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 0
          constraints:
              type: enum8

    - label:
          "Step 37: At the start of the next step, please manually initiate the
          DUT self-test"
      cluster: "LogCommands"
      PICS: PICS_USER_PROMPT && SMOKECO.M.ManuallyControlledTest
      command: "UserPrompt"
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label:
          "Step 38: TH waits for a report of TestInProgress attribute from DUT
          with a timeout of 180 seconds"
      PICS: SMOKECO.S.A0005 && SMOKECO.M.ManuallyControlledTest
      command: "waitForReport"
      attribute: "TestInProgress"
      timeout: 180
      response:
          value: 1
          constraints:
              type: boolean

    - label: "Step 39: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000 && SMOKECO.M.ManuallyControlledTest
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 4
          constraints:
              type: enum8

    - label:
          "Step 40: TH waits for a report of TestInProgress attribute from DUT
          with a timeout of 180 seconds"
      PICS: SMOKECO.S.A0005 && SMOKECO.M.ManuallyControlledTest
      command: "waitForReport"
      attribute: "TestInProgress"
      timeout: 180
      response:
          value: 0
          constraints:
              type: boolean

    - label: "Step 41: TH reads SelfTestComplete event from DUT"
      PICS: SMOKECO.S.E05 && SMOKECO.M.ManuallyControlledTest
      command: "readEvent"
      event: "SelfTestComplete"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: {}

    - label: "Step 42: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000 && SMOKECO.M.ManuallyControlledTest
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 43: TH reads AllClear event from DUT"
      PICS: SMOKECO.S.E0a && SMOKECO.M.ManuallyControlledTest
      command: "readEvent"
      event: "AllClear"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: {}

    - label: "Step 44: TH sends SelfTestRequest command to DUT"
      PICS: SMOKECO.S.C00.Rsp
      command: "SelfTestRequest"

    - label:
          "Step 45: TH waits for a report of TestInProgress attribute from DUT
          with a timeout of 180 seconds"
      PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0005
      cluster: "LogCommands"
      command: "UserPrompt"
      verification: |
          ./chip-tool smokecoalarm read test-in-progress 1 1

          This step needs to be completed quickly

          [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0005 DataVersion: 1795725838
          [TOO]   TestInProgress: TRUE
          [1690268959.715817][13732:13734] CHIP:EM: <<< [E:12324i S:6365 M:86298174 (Ack:6158737)] (S) Msg TX to 1:0000000000000001 [D1BB] --- Type 0000:10 (SecureChannel:StandaloneAck)
      arguments:
          values:
              - name: "message"
                value: "Enter 'y' after success"
              - name: "expectedValue"
                value: "y"

    - label: "Step 46: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 4
          constraints:
              type: enum8

    - label: "Step 47a: TH subscribes to TestInProgress attribute from DUT"
      PICS: SMOKECO.S.A0005
      command: "subscribeAttribute"
      attribute: "TestInProgress"
      minInterval: 1
      maxInterval: 900

    - label:
          "Step 47b: TH waits for a report of TestInProgress attribute from DUT
          with a timeout of 180 seconds"
      PICS: SMOKECO.S.A0005
      command: "waitForReport"
      attribute: "TestInProgress"
      timeout: 180
      response:
          value: 0
          constraints:
              type: boolean

    - label: "Step 48: TH reads SelfTestComplete event from DUT"
      PICS: SMOKECO.S.E05
      command: "readEvent"
      event: "SelfTestComplete"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: {}

    - label: "Step 49: TH reads ExpressedState attribute from DUT"
      PICS: SMOKECO.S.A0000
      command: "readAttribute"
      attribute: "ExpressedState"
      response:
          value: 0
          constraints:
              type: enum8

    - label: "Step 50: TH reads AllClear event from DUT"
      PICS: SMOKECO.S.E0a
      command: "readEvent"
      event: "AllClear"
      eventNumber: "LastReceivedEventNumber + 1"
      response:
          value: {}