Test_TC_SU_2_3.yaml

# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    3.3.1.[TC-SU-2.3]Transfer of Software Update images between DUT and TH/OTA-P

PICS:
    - MCORE.OTA.Requestor

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label:
          "Step 1: DUT sends a QueryImage command to the TH/OTA-P.
          RequestorCanConsent is set to True by DUT. OTA-P/TH responds with a
          QueryImageResponse with UserConsentNeeded field set to True."
      PICS: MCORE.OTA.RequestorConsent
      verification: |
          Run the OTA Provider App using the command:

          ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE} -c

          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 123 0 0 0 321 0

          Where 321 is OTA Requestor node ID and 123 is OTA Provider node ID

          Verify that the DUT obtains user consent before transferring the image. This step is vendor specific.
      disabled: true

    - label:
          "Step 2: DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P
          sends a QueryImageResponse back to DUT. QueryStatus is set to
          'UpdateAvailable'. Set ImageURI to the location where the image is
          located."
      verification: |
          Run the OTA Provider App using the command:

          ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE} -q updateAvailable

          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 123 0 0 0 321 0

          Where 321 is OTA Requestor node ID and 123 is OTA Provider node ID

          Verify that the transfer of the software image happens all the way until the last Block is acknowledged from OTA Provider logs to DUT

          [1645748688025] [99779:20370762] CHIP: [BDX] OutputEvent type: AckEOFReceived
          [1645748688025] [99779:20370762] CHIP: [BDX] Transfer completed, got AckEOF
      disabled: true

    - label:
          "Step 3: DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P
          sends a QueryImageResponse back to DUT. QueryStatus is set to
          'UpdateAvailable'. Set ImageURI with the https url of the software
          image."
      PICS: MCORE.OTA.HTTPS
      verification: |
          Out of scope
      disabled: true

    - label:
          "Step 4: During the transfer of the image to the DUT, force fail the
          transfer before it completely transfers the image. Wait for the Idle
          timeout so that reading the UpdateState Attribute of the OTA Requestor
          returns the value as Idle. Initiate another QueryImage Command from
          DUT to the TH/OTA-P."
      verification: |
          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 123 0 0 0 321 0

          Where 321 is OTA Requestor node ID and 123 is OTA Provider node ID

          Kill the OTA Provider App during the transfer of the image to the DUT before it completely transfers the image.

          Wait for atleast 5 minutes or more and read the UpdateState Attribute .

          ./chip-tool otasoftwareupdaterequestor read update-state 321 0

          Verify UpadeateState value is 1 On TH(chip-tool) log

          [1653645452.044092][15281:15286] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_002A Attribute 0x0000_0002 DataVersion: 1306504521
          [1653645452.044186][15281:15286] CHIP:TOO:   UpdateState: 1

          Relaunch the OTA Provider App and initiate another query
          ./chip-tool otasoftwareupdaterequestor announce-otaprovider 123 0 0 0 321 0

          Verify that the DUT starts a new transfer of software image when sending another QueryImage request i.e. Start Offset field in ReceiveInit message received on OTA Provider side is 0

          [1651260350133] [18661:35147439] CHIP: [ATM] ReceiveInit
          [1651260350133] [18661:35147439] CHIP: [ATM]   Proposed Transfer Control: 0x20
          [1651260350133] [18661:35147439] CHIP: [ATM]   Range Control: 0x0
          [1651260350133] [18661:35147439] CHIP: [ATM]   Proposed Max Block Size: 1024
          [1651260350133] [18661:35147439] CHIP: [ATM]   Start Offset: 0x0000000000000000
          [1651260350133] [18661:35147439] CHIP: [ATM]   Proposed Max Length: 0x0000000000000000
          [1651260350133] [18661:35147439] CHIP: [ATM]   File Designator Length: 8
          [1651260350133] [18661:35147439] CHIP: [ATM]   File Designator: test.ota
      disabled: true

    - label:
          "Step 5: During the transfer of the image to the DUT, force fail the
          transfer before it completely transfers the image. Initiate another
          QueryImage Command from DUT to the TH/OTA-P. Set the RC[STARTOFS] bit
          and associated STARTOFS field in the ReceiveInit Message to indicate
          the resumption of a transfer previously aborted."
      PICS: MCORE.OTA.Resume
      verification: |
          Out of scope
      disabled: true