Skip to content

Latest commit

 

History

History
40 lines (30 loc) · 1.24 KB

README.md

File metadata and controls

40 lines (30 loc) · 1.24 KB

axefx2-usb-setup

The axefx2-usb-setup program prepares your Linux system to load USB firmware into an Axe-FX II connected via USB. You only need to run this program once on each Linux system to which you'll connect your Axe-FX II.

Once your Linux system has been prepared, connecting an Axe-FX II via USB will cause the USB firmware to be loaded into the Axe-FX II; this enables the exchange of MIDI and audio signals between your Linux system and the Axe-FX II.

Your Linux system may require additional configuration to use the MIDI and audio data. Such configuration is beyond the scope of this document.

Assuming that your Linux system uses ALSA for sound and MIDI, the following commands may be used to quickly confirm a connection between your Linux sytem and Axe-FX II:

$ amidi -l
$ aplay -l
$ arecord -l

In each case, the output should include a line that mentions AXE-FX II.

Prerequisites

  • Linux 2.6.35 or later
  • udev
  • fxload

Acknowledgment

The axefx2-usb-setup program is based upon the work of Joachim Gahl. Joachim did all the hard work of learning how to make Linux and an Axe-FX II communicate. I merely simplified and reworked the script to meet my own preferences and requirements.