Sync csa branch with main #264
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![github-actions[bot]](https://avatars.githubusercontent.com/in/15368?s=60&v=4){kind=small}
* [Zephyr] Add ZMS to Zephyr port Added a possibility to use ZMS fs backend in Zephyr. NVS fs backend imply is now controlled by the nrfconnect platform configuration directly. All other platforms use NVS fs backend by default. Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no> [nrf toup] Fix defines for ZMS It can be squashed with the 0c49058 commit. Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no> * [Zephyr] Fix ICD LIT connected configurations According to specification, if ICD LIT is supported, UAT and LITS features must be supported too. If `CHIP_ICD_LIT_SUPPORT` is selected, select CIP and UAT configs instead of implying them. Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no> * [nrfconnect] Introduced Kconfigs to configure few params Introduced new Kconfig options to be able to configure the parameters related to persistent subscriptions re-establishment. Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no> [nrfconnect] Added module to synchronize DFU processes Introduced a module that can be used to synchronize DFU processes and make it mutual exclusive (prevent concurrent DFU runs using different protocols, e.g Matter OTA and DFU over BT SMP). Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no> [nrfconnect] Implement IPv6 agnostic L2 network state getters * Added new API for generic IPv6 connectivity checks * This patch allows the application layer to limit the amount of pre-processor logic (CONFIG_NET_L2_OPENTHREAD/CONFIG_CHIP_WIFI) needed to configure the Signed-off-by: Marcin Kajor <marcin.kajor@nordicsemi.no> [nrfconnect] Added support for settings shell in mem profiling Enabled settings shell configuration and increased shell command buffer size when `CHIP_MEMORY_PROFILING` is enabled to allow reading and writing settings using shell. Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no> [nrfconnect] Introduced Kconfig to configure CHIP stack size There is not Kconfig that would allow to set the CHIP task size, what is not convenient, as other stacks can be configured using Kconfig. [nrfconnect] Added log for the WiFi connection failure This might help when debugging the WiFi connection failures. Signed-off-by: Marcin Kajor <marcin.kajor@nordicsemi.no> [nrfconnect] Refactor ExternalFlashManager Make `ExternalFlashManager` a singleton Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no> [nrfconnect] Increase workqueue stack size for LIT Whien LIT is enabled, higher workqueue stack size is required when entering active mode. Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no> [nrfconnect] Switch to nRF54L15 DK - Removed support for nRF54L15 PDK and added for nRF54L15 DK [nrfconnect] wifi: Migrate to nRF70 upstream nRF70 support moved upstream, update the names. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no> [nrfconnect] matter: crypto: Use psa_crypto_config -Previously there was a library called mbedcrypto_common which was used to pass build-related configurations to matter. This is changed to instead reference to the following: -psa_crypto_config (for PSA and Mbed TLS configurations) -psa_interface (for PSA crypto include files) -The commit also removes passing the PSA crypto driver config file as this is no longer needed for an interface build (call from matter) Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no> [nrfconnect] Fixed mbedtls configs selection The updated way of handling mbedtls config file is done correctly only for TF-M builds, but without it some of the files are missing Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no> [nrfconnect] Disable unsupported SHELL_WILDCARD SHELL_WILDCARD is not supported for Matter devices in the newest Zephyr version because it selects POSIX_C_LIB_EXT, so we need to disable it. [nrfconnect] Enable SPI for nRF54L15DK NS build Added nRF54L15 DK NS to configuration. Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no> [nrfconnect] config: align the MCUmgr Bluetooth transport Kconfig Aligned the MCUmgr Bluetooth transport Kconfig with the latest changes from Zephyr. Ref: NCSDK-29061 Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no> [nrfconnect] Enable MLDv2 join procedure for IPv6 Multicasts This commit updates the IPv6 multicast subscription mechanism by explicitly using the MLDv2 join procedure. This change ensures proper registration for multicast addresses, improving reliability in multicast communication. Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no> [nrfconnect] Implicitly enable PSA crypto driver for given platform This commit makes in clear which crypto driver is enabled by default. Additionally, stack overflow has been fixed for CC3XX variant, and mbedTLS Heap is disabled for TF-M variant. Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no> [nrfconnect] wifi: Fix nRF70 heap allocation The upstream WPA supplicant uses k_heap instead of libc_heap, so, move the heap to k_heap. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no> [nrfconnect] wifi: Fix the heap allocation warning By default nRF70 driver allocates a higher heap to handle most cases, but as Matter doesn't use much heap, enable the ignore minimum warning configuration. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no> [nrfconnect] Increased stack size for the OpenThread with nRF54L When using nRF54L15 the stack size required for crypto operations by OpenThread is bigger and must be increased. Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no> [nrfconnect] Enable ZMS in nrfconnect if RRAM is in use. Disabled NVS and enabled ZMS fs backend for all devices that uses RRAM. Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no> [nrfconnect] Increased CHIP stack size for cracen based targets Targets using cracen crypto backend requires bigger CHIP stack size. Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no> [nrfconnect] disable `FPROTECT` for nRF54L15 `FPROTECT` should be disabled for nRF54L15 in app to allow correctly protecting whole region of mcuboot Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no> [nrfconnect] Factory data partition location change - factory data can be placed before or after settings partition Signed-off-by: Konrad Grucel <konrad.grucel@nordicsemi.no> [nrfconnect] Added config to enable report on active mode Introduced Kconfig option that allows to enable an ICD to send data report on entering the active mode. Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no> [nrfconnect] Increased system workqueue size for LIT The LIT devices seem to need bigger size of workqueue on 54L. Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no> [nrfconnect] Change `CHIP_SPI_NOR` config dependency Set `CHIP_SPI_NOR` to y for all targets that are built for nRF54L15DK, regardless of target SoC. Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no> [nrfconnect] Disable chip_build_tools Disable chip_build_tools Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> * [Crypto] Stop compiling legacy SPAKE2P if PSA is available If the CHIP_CRYPTO_PSA_SPAKE2P is enabled the build system should not compile Legacy Spake2p implementation, because the PSA one is available in the PSASpake2p.cpp file. * VerifyOrDie logging for constrained devices 1. Add the configuration to enable logging the location of a failed VerifyOrDie() without logging the condition to reduce the code size impact but still be able to debug failing VerifyOrDie() conditions. 2. Allow to override __FILE__ macro with __FILE_NAME__ by setting the warn_builtin_macro_redefined GN arg to false to further reduce the code size increase. 3. Add Kconfigs for nRF Connect platform for enabling both features. Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no> * Include EXTRAVERSION in Matter software version string When a Matter application provides the VERSION file, the Matter software version string is set to 4-number string, such as "2.7.99+0" and the EXTRAVERSION field, which is typically used to denote the branch or tag name, such as "dev" or "rc1", is ignored. If the EXTRAVERSION field is non-empty, set the Matter software version string to a string such as "2.7.99-dev+0". * Clear Thread Network after last fabric is removed Dataset has to be cleared to allow commissioning to different network when CONFIG_CHIP_LAST_FABRIC_REMOVED_ERASE_ONLY is used. Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> * [workflows] Update docker images to version 98 Update docker image version to 98. Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> * [nrfconnect] Change the recommended version to 2.9.0 Change the recommended version of nRF Connected SDK to 2.9.0. Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> * [nrfconnect] Align examples to NCS 2.9.0 Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> * [nrfconnect] Fix FLASH overflow Disable some logs in lighting-app and lock-app due to flash overflow. Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> * [nrfconnect] Align test_driver configuration to NCS 2.9.0 Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> * [nrfconnect] Fix nrf builder Use correct path when running ctest. Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> * [nrfconnect] Disable native build Disable Zephyr native build until next release due to Zephyr regression. Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> --------- Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no> Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no> Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no> Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no> Co-authored-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no> Co-authored-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no> Co-authored-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no> Co-authored-by: Damian Krolik <damian.krolik@nordicsemi.no>
* Run dos2unix on all DM XML files in 1.4 * Add newlines at end of all DM XML files for 1.4 sed -i -e '$a\' data_model/1.4/device_types/* sed -i -e '$a\' data_model/1.4/clusters/* * DM XMLs: switch 1.4 DM XMLs to alchemy * Generator updates to alchemy * Update 1.4 using alchemy 1.5.0 * Restyled by autopep8 * Add the in-progress defines to match the 1.5 0.7 spec ballot * Fix define processing for alchemy, add tag file * Fix linter, add check for non-existent tag file * Remove a leftover file - this isn't generated by alchemy * Remove file from gni list --------- Co-authored-by: Restyled.io <commits@restyled.io>
Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no>
* Changed Dockerfile for crosscompile image. Now pointing to a new sysroot. Changed needed for NFC Commissioning. * Bumped version --------- Co-authored-by: Andrei Litvin <andy314@gmail.com>
…L) to chip-tool (#37049) * [chip-tool] Add chip-tool dcl fake cluster commands * [chip-tool] Add a fake local dcl server script for testing/developement purposes * [chip-tool] Add chip-tool dcl tc-display and tc-display-by-payload commands * [General Commissioning Server] Dynamically encode the feature map 'GeneralCommissioning::Feature::kTermsAndConditions' if CHIP_CONFIG_TERMS_AND_CONDITIONS_REQUIRED is set * [Examples/platform/linux] Set default TermsAndConditions if requested from the command line * [chip-tool] Add TermsAndConditions support to chip-tool pairing code command
|
The check for |
mkardous-silabs
approved these changes
Jan 30, 2025
mykrupp
approved these changes
Jan 30, 2025
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This PR syncs the csa branch with the main branch.
PR MUST BE MERGED WITH MERGE COMMIT - ADMIN MUST ENABLE THE OPTION