FeatureSupport

Jump to bottom Edit New page

Andrew Rapp edited this page Dec 31, 2016 · 1 revision

The following API types are supported:

XBee (802.15.4 and ZNet/ZB Pro):

AT Command (0x08)
AT Command Response (0x88)
AT Command - Queue Parameter Value (0x09)
Modem Status (0x8A)

XBee series 1 (802.15.4):

16/64-bit RX I/O Sample (0x83, 0x82)
TX (Transmit) Request: 64-bit address (0x00)
TX (Transmit) Request: 16-bit address (0x01)
TX (Transmit) Status (0x89)
RX (Receive) Packet: 64-bit Address (0x80)
RX (Receive) Packet: 16-bit Address (0x81)

XBee series 2 (ZNet/ZB Pro):

ZigBee Transmit Request (0x10)
ZigBee Transmit Status (0x8B)
ZigBee Receive Packet (AO=0) (0x90)
ZigBee IO Data Sample Rx Indicator (0x92)
Remote Command Request (0x17)
Remote Command Response (0x97)
Explicit Addressing ZigBee Command Frame (0x11)
ZigBee Explicit Rx Indicator (0x91)
Node Identification Indicator (AO=0) (0x95)

Not supported at this time: XBee Sensor Read Indicator (AO=0)