SparkFun Electronics
Change the repository type filter
All
Repositories list
1.4k repositories
- SparkFun's KiCad Libraries
- A USB breakout board for the ZED-X20P allband GNSS RTK receiver.
- A USB evaluation board for the dual L1/L5 frequency DAN-F10N GNSS receiver.
SparkFun_GNSS_Flex_pHAT
Public- This is an ecosystem of modular plug-in boards, featuring SparkFun's latest and most popular GNSS receivers.
- A simple breakout board for the SparkPNT GNSS Flex modules
- Breakout board for the mosaic-X5 triband GNSS receiver with RTK capabilities.
- The SparkFun RTK mosaic-X5 is a GNSS station based on the Septentrio mosaic-X5 GNSS receiver. It features an aluminum enclosure, support for a WiFi network bridge, data logging, and multiple power options, including PoE.
- The hardware repository for the designs of the PCBs in the SparkPNT RTK Facet mosaic. This repo also includes the design files for the display and connector boards utilized in our next-generation of Facet GNSS products.
- The SparkFun GNSS Disciplined Oscillator (GNSSDO) is a precision time and frequency reference based on the Septentrio mosaic-T GNSS receiver. It features a disciplined 10MHz TCXO oscillator, aluminum enclosure, Ethernet, PTP broadcast, data logging, multiple power options, and supports the Fugro AtomiChron timing service.
- Breakout board for the Septentrio mosaic-T GNSS timing receiver
SparkFun_RTK_Postcard
Public- A small breakout board for the quadband RTK capable LG290P GNSS receiver .
red_vision
Publicqwiic_huskylens_py
Public- 1.30" OLED display: 128 x 64 white pixels; Qwiic connections
- Documentation, example code, and hardware for the SparkFun Soft Power Switch - USB-C.
- Documentation and hardware files for the Qwiic Power Switch, which is a power switch for the Qwiic system.
SparkFun_u-blox_NEO-F10N
PublicDocumentation and hardware files for the low cost SparkFun GNSS L1/L5 Breakout - NEO-F10N.- Documentation, example code, and hardware for the SparkFun Soft Power Switch - JST 2mm.
SparkFun_RTK_EVK
PublicSparkFun's RTK Evaluation Kit: ESP32-WROVER, ZED-F9P, NEO-D9S, LARA-R6001D, W5500- This repository corresponds with [this SparkFun Tutorial](https://learn.sparkfun.com/tutorials/1199) on using BLE and a React WebApp to send OTA updates to an ESP32
SparkFun_BlueSMiRF-v2
PublicDocumentation and hardware Files for the SparkFun BlueSMiRF v2. These boards work as a wireless serial UART pipe and are a great wireless replacement for serial cables. Simply pair, connect, and transmit serial data between your TX/RX lines! Any serial stream from 2400 to 921600 baud can be passed seamlessly between two devices.- Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.