Libraries for STM32 (STM32F103C8T6) on pure CMSIS.

MAX6675 full-featured driver library for general MCU and Linux.

Library for MAX6675/MAX31855 from Maxim Integrated for STM32

A feature-rich reflow Hot-Plate firmware i.e. usable for "Tim's Hot Plate" (https://www.instructables.com/Tims-Hot-Plate/)

Arduino library for MAX6675 chip for K type thermocouple

[For Arduino] Library for working with a thermocouple based on the MAX6675 driver.

Arduino library for 12-bit MAX6675 K-thermocouple to digital converter

Drum coffe Roaster: Arduino, Temp PID control, SSR Electric heat sistem,

ESP32 Peripheral Drivers built with ESP-IDF

PID temperature controller for laboratory use

Arduino multichannel input module for MAX31855 and MAX6675 with serial interface

A ESP32 based Temperture monitor and timer with ST7789 TFT Display.

паяльник на ардуино (тысячи их)

A variation of my PI controlled Temp / status monitors. This has a 2-wire sensor, Thermocouples, and adafruit temp/humid sensors. Send data to a Home Assistant Instance via MQTT Discovery.

This project features an engine control unit (ECU) for a gas turbine, built on the ESP32 platform. The code is developed using the Arduino IDE and leverages readily available libraries for ease of integration and development. The repository also includes optional code for a turbine engine instrument cluster, designed to run on a separate ESP32.

Caracterización de termopar con MAX6675 en Arduino

Max6675 Thermocople + Wemos d1 + Blynk

This repository is made for the Python Course (Areandina)

A collection of sample projects written in Toit

Python app (PyQt GUI) deployed on Raspberry Pi to control a custom made oven.